Double Glazing

Insulcool Double Glazing

Customised soft coat double glazing configurations for commercial and residential projects

Insulcool is a custom double glazing solution for performance and aesthetic outcomes without limitation. Architects and homeowners can configure and specify exacting InsulCool makeups to meet thermal performance requirements in any climate zone. For projects where safety is paramount, Insulcool can be configured into a custom laminated soft coat Low E makeup.

PROJECT SHOWCASE
Warm edge spacer technology
InsulCool IGUs feature thermally broken warm edge thermoplastic (TPS) spacer technology sourced from global leaders Quanex and Kommerling.
Soft coat Low E performance
Configure your IGU with nano-precise soft coat Low E coatings for unbeatable U Value and VLT performance.
Custom laminated soft coats
For projects where safety and performance are paramount, InsulCool IGUs can be configured with a custom laminated soft coat Low E.
Insulcool Double Glazing

Double Glazing Performance Data

COLOUR*
THICKNESSS
VISIBLE
U VALUE**
SHGC
SOLAR (TRANS)
SC
Ultra Cool-E#2
6+12+6
69
1.33
0.32
29
0.37
Green
6+12+6
58
1.33
0.31
21
0.36
Grey
6+12+6
34
1.33
0.25
15
0.29
Bronze
6+12+6
35
1.33
0.25
15
0.29
Dark Grey
6+12+6
6
1.33
0.11
3
0.12
Ultra Cool-E#2
8+12+8
68
1.32
0.32
28
0.37
* Colour is the external panel of glass. Internal panel is the Ultra Light-E soft coat, unless otherwise stated.
** U Values based on argon filled units. The performance values shown above represent nominal values. Please refer to our terms and conditions for further details regarding stated performance values of insulated glazing units.
Imageink Logo Icon

Find the perfect double glazing solution for your project

Insulcool Double Glazing

Double Glazing Performance Data

COLOUR*
THICKNESSS
VISIBLE
U VALUE**
SHGC
SOLAR (TRANS)
SC
Ultra Light - E#2
4+12+4
81
1.4
0.58
54
0.67
Grey
4+12+4
51
1.4
0.43
36
0.49
Green
4+12+4
72
1.4
0.44
37
0.5
Bronze
4+12+4
55
1.4
0.45
39
0.52
Ultra Light - E#2
5+12+5
80
1.39
0.57
53
0.66
Grey
5+12+5
45
1.39
0.39
32
0.45
Green
5+12+5
69
1.39
0.41
34
0.47
Bronze
5+12+5
49
1.39
0.42
35
0.48
Ultra Light - E#2
6+12+6
79
1.39
0.57
51
0.65
Grey
6+12+6
39
1.39
0.36
28
0.41
Green
6+12+6
67
1.39
0.39
31
0.44
Bronze
6+12+6
44
1.38
0.39
31
0.44
* Colour is the external panel of glass. Internal panel is the Ultra Light-E soft coat, unless otherwise stated. ** U Values based on argon filled units. The performance values shown above represent nominal values. Please refer to our terms and conditions for further details regarding stated performance values of insulated glazing units.
Imageink Logo Icon

Find the perfect double glazing solution for your project

Insulcool Double Glazing

Double Glazing Performance Data

COLOUR*
THICKNESSS
VISIBLE
U VALUE**
SHGC
SOLAR (TRANS)
SC
Ultra Plus 50
6+12+6
49
1.296
0.22
19
0.25
Ultra Plus 60
6+12+6
59
1.295
0.26
23
0.3
Ultra Plus 70
6+12+6
67
1.294
0.28
26
0.32
* Colour is the external panel of glass. Internal panel is the Ultra Light-E soft coat, unless otherwise stated. ** U Values based on argon filled units. The performance values shown above represent nominal values. Please refer to our terms and conditions for further details regarding stated performance values of insulated glazing units.
Imageink Logo Icon

Find the perfect double glazing solution for your project

Insulcool Double Glazing

Double Glazing Performance Data

COLOUR*
THICKNESSS
VISIBLE
U VALUE**
SHGC
SOLAR (TRANS)
SC
Ultra Pro - 61
6+12+6
60
1.325
0.3
27
0.35
Ultra Pro - 72
6+12+6
71
1.34
0.35
31
0.4
* Colour is the external panel of glass. Internal panel is the Ultra Light-E soft coat, unless otherwise stated. ** U Values based on argon filled units. The performance values shown above represent nominal values. Please refer to our terms and conditions for further details regarding stated performance values of insulated glazing units.
Imageink Logo Icon

Find the perfect double glazing solution for your project

Anti-slip Performance Data

PATTERN*
COLOUR
COVERAGE
SLIP RATING**
APPLICATION
MAX SIZE
3mm Dot Inverted
White
40%
P5
Outdoors
2450 x 4800
3mm Dot
White
60%
P5
Outdoors
2450 x 4800
3mm Dot
White
50%
P4
Indoors
2450 x 4800
3mm Dot
White
40%
P4
Indoor
2450 x 4800
*Standard pattern range. Custom patterns and colours are available however will require slip testing to approved standards.
** Tested with wet pendulum test according to AS 4586:2013, slip resistance classification of new pedestrian surface materials.

Whisper sound reduction index

Whisper double glazed units
THICKNESS (MM)
RW
C
CTR
3+12+6.76
38
-1
-5
12.76+20+8.76
50
-2
-5
14.76+20(Ar90)+10.76
51
-1
-5
3+12+8.76
38
-1
-5
6+12+6.76
41
-2
-5
6+12+8.76
41
-1
-5
6+12+10.76
42
-2
-5
8+12+6.76
42
-1
-4
8+12+8.76
44
-1
-4
6.76+12+6.76
43
-1
-5
12.76+12+16.76
49
-1
-5
Whisper single laminate
THICKNESS (MM)
RW
C
CTR
6.76
36
-1
-3
8.76
3
-1
-3
10.76
38
-1
-3
12.76
39
-1
-3
16.76
41
-1
-3
20.76
43
-1
-3
24.76
44
-1
-3
Imageink Logo Icon

Find the perfect acoustic glazing solution for your project

Product information

Insulcool is a fully customisable, high performance double glazing solution designed using soft coat and hard coat Low E glass from the world's leading manufacturers. As a custom solution, Insulcool does not have a standard range of configurations, and is configured on a project basis to meet exact performance outcomes.

With an extensive range of tinted and Low E glass options from a wide range of global flat glass manufacturers, we can often provide multiple Insulcool IGU configurations to match your thermal and aesthetic requirements.

All Insulcool solutions are manufactured with thermally broken warm edge spacers as standard for optimal thermal performance. Compared to aluminium spacers, warm edge spacers have a far lower thermal conductivity resulting in greatly reduced thermal bridging and increased performance of the glass edge.

CUSTOM LAMINATED SOFT COATS

  • For projects where safety and performance are paramount, Insulcool is available in a custom laminated soft coat configuration. This technically complex specification involves laminating the soft coat panel to a second panel prior to assembling the IGU. If your project requires a laminated soft coat configuration, please contact us for assistance with specification.
MAXIMUM PANEL SIZE
  • 2480x4000mm annealed
CONFIGURATIONS
  • 2480x4000mm annealed
THICKNESS
  • Clear
  • Low iron
  • Tinted
  • Acoustic
  • Hard Coat Low-E
  • Soft Coat Low-E
HOW TO SPECIFY
To provide the most accurate specification for your project, please complete a specification request with your requirements.
If you would prefer to speak directly with our technical sales team, please contact us on 1300 040 799, or email info@coolingbros.com.au

Insulcool is a custom IGU solution designed on a project basis to meet your exact performance requirements. As such we do not have a standard range of performance values. If you know your desired U Value, SHGC and VLT, our Glass Selection Tool may assist with identifying a suitable InsulCool Ultra Series IGU for your project. You can access the tool here.

Alternatively, please contact us for assistance. Our technical sales team will be happy to discuss your project further before advising a range of solutions. You can reach us on 1300 040 799 or via email info@coolingbros.com.au

Product information

Insulcool is a fully customisable, high performance double glazing solution designed using soft coat and hard coat Low E glass from the world's leading manufacturers. As a custom solution, Insulcool does not have a standard range of configurations, and is configured on a project basis to meet exact performance outcomes.

With an extensive range of tinted and Low E glass options from a wide range of global flat glass manufacturers, we can often provide multiple Insulcool IGU configurations to match your thermal and aesthetic requirements.

All Insulcool solutions are manufactured with thermally broken warm edge spacers as standard for optimal thermal performance. Compared to aluminium spacers, warm edge spacers have a far lower thermal conductivity resulting in greatly reduced thermal bridging and increased performance of the glass edge.

FEATURES

CUSTOM LAMINATED SOFT COATS

  • For projects where safety and performance are paramount, Insulcool is available in a custom laminated soft coat configuration. This technically complex specification involves laminating the soft coat panel to a second panel prior to assembling the IGU. If your project requires a laminated soft coat configuration, please contact us for assistance with specification.
MAXIMUM PANEL SIZE
  • 2480x4000mm annealed
CONFIGURATIONS
  • 2480x4000mm annealed
THICKNESS
  • Clear
  • Low iron
  • Tinted
  • Acoustic
  • Hard Coat Low-E
  • Soft Coat Low-E
HOW TO SPECIFY
To provide the most accurate specification for your project, please complete a specification request with your requirements. If you would prefer to speak directly with our technical sales team, please contact us on 1300 040 799, or email info@coolingbros.com.au

Insulcool is a custom IGU solution designed on a project basis to meet your exact performance requirements. As such we do not have a standard range of performance values. If you know your desired U Value, SHGC and VLT, our Glass Selection Tool may assist with identifying a suitable InsulCool Ultra Series IGU for your project. You can access the tool here.

Alternatively, please contact us for assistance. Our technical sales team will be happy to discuss your project further before advising a range of solutions. You can reach us on 1300 040 799 or via email info@coolingbros.com.au

Related products

Insulcool Double Glazing

FAQs

All our most commonly asked questions. Can't see your answer? Please call us on 1300 040 799 or get in touch via contact form below.

What is the difference between Hard Coat Low E and Soft Coat Low E?

Hard coats (Pyrolytic coatings) are a single layer vapor deposit applied at high temperatures during the float glass process. Hard coats are ideal for use as a single (monolithic) piece of glass as the coating is highly durable.

Soft coats (sputter coats) are applied in a large magnetron sputter vacuum deposition (MSVD) machine. This allows for a nano-technologically precise coating with multiple layers of metals such as silver, greatly improving performance. Soft coats typically achieve greater solar control, higher visible light transmission (VLT), and lower U Values compared to hard coat Low-E glass. Soft coats can only be used with an IGU as the coating is fragile and easily damaged.

What does single/double/triple silver soft coats refer to?

Single, double, and triple silver refer to the number of silver layers within the soft coat. Single silver soft coats achieve lower performance when compared to triple silver, which has an increased ability to reflect long-wave infrared radiation. This improves solar performance and reduces overall heat loss/gain.

What are the advantages of warm edge spacers?

Unlike conventional aluminium spacers, warm edge spacers are made of composite materials and extruded via CNC directly to the glass during manufacure. This combination of material and manufacturing technology results in a spacer that has lower thermal conductivity, reducing heat loss and maximising thermal performance. For IGUs filled with argon gas, warm edge spacers offer vastly improved impermeability with effectively zero leakage over the lifespan of the unit.

All InsulCool IGUs are manufactured with warm edge spacers as standard.

What is thermal breakage, and are IGUs prone to this?

Thermal breakage refers to glass breakage due to temperature differences. Any glass, including IGUs, can be prone to thermal breakage if exposed to extreme and divergent temperatures. To prevent this, specify IGUs with heat-strengthened glass for applications subject to rapid temperature changes.

Can I specify a custom laminated soft coat Low-E in my IGU?

For projects where safety and performance are paramount, IGUs can be configured with a custom laminated Soft Coat Low-E. Please contact us for details.

Where are InsulCool IGUs manufactured?

InsulCool IGUs are manufactured in Perth and Melbourne and delivered across Australia and New Zealand.

Where do you source Low-E glass for InsulCool IGUs?

The soft coat Low E used in our InsulCool range of IGUs is sourced from a range of leading global manufacturers including Guardian, ACG, Saint Gobain, and others.

Can I use decorative glass within an InsulCool IGU?

Yes, InsulCool can be produced with decorative glass products such as ImagInk, Digiglass, and Vanceva.

How to I select the right Soft Coat Low E IGU for my project?

If you know your preferred U Value, SHGC and VLT values you can use our glass selection tool to identify the most appropriate solutions for your project. You can access the tool here.

If you do not yet know your performance objectives, call us on 1300 040 799. Our technical sales team will be able to assist with determining the best solution for your requirements.

CONTACT US
LOCATION
MY ENQUIRY RELATES TO
Submit
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Submit
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Select product
PLEASE UPLOAD ANY RELEVANT DRAWINGS TO REQUIREMENTS
Uploading...
fileuploaded.jpg
Upload failed. Max size for files is 10 MB.
Submit
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Submit
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
We provide standard samples free of charge to building industry and visual arts professionals. Vanceva and custom samples may incur a small processing charge. If you have a retail enquiry, we have a full range of samples available for viewing on appointment. Please contact us to arrange a viewing with your closest sales representative.
Submit
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Submit
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Are you a practice or library manager? Our technical sales team visits architectural practices and design firms for product demonstrations and CPD events. If you’d like us to visit your firm, please complete your details below.
Submit
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Submit
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Wooden staircase using glass panels
RESOURCEs

Find everything you need to know about our glass solutions